COATINGS

Products    |    HighTemprature Insulation    |    Coatings
TOPCOAT SILICONE

    Silicone
  • One-sided/two-sided coating with silicone rubber with high load capacity even under extreme mechanical, thermal and electrical influences.
  • Good light, UV, and oxidation resistance
  • Considerable resistance to acids and alkaline solutions, weatherproof
  • Good dirt- and oil-repellent effect, good electrical insulation

    • Standard silicone
  • Temperature resistance from approx. –50 °C to approx. +250 °C with excellent flexibility
  • Different colour settings possible

    • Topcoat
  • Silicone rubber topcoat with dry, soft touch for improved fabrication characteristics

TRANSFER SILICONE

    One-sided coating using the transfer process

    Surface:
  • Closed or uniform
  • Mat or glossy
  • Smooth or structured

HIGH TEMPERATURE SILICONE

  • Improved temperature resistance from approx. –50 °C to approx. +300 °C
  • Short-term (1 h) to approx. +350 °C
  • Different colour settings possible

HTM600-CS

    HTM600
  • Flame-resistant inorganic treatment up to approx. 600 °C
  • Soft touch, dust-binding
  • Increased slip resistance

    • CS
  • Flame-resistant treatment up to approx. 700 °C
  • Permanent temperature resistance, short-term up to approx. 750 °C
  • High slip and cut resistance
  • Different colour settings possible

HT90-AR-FH1000

    HT90
  • Inorganic, white special treatment for short-term temperature loads of up to 900 °C
  • Permanent temperature resistance up to approx. 750 °C
  • Fabric with high rigidity

    • AR / FH1000
  • Golden brown fabric treatment for improved abrasion, cut, and tear resistance
  • Temperature resistance up to approx. 1,000 °C

G-TEC & G-TEC ULTRA

    Improved wear resistance:
  • Excellent abrasion resistance
  • Martindale (8 h/650 °C) > 8,000 cycles
  • Flame-resistant, 30 s edge flaming = self-extinguishing
  • Available in different colour settings

    • G-Tec
  • Grey special treatment with metal oxide.
  • Temperature resistant up to 700 °C (permanent temperature) as well as short-term (8 h) 750 °C

    • G-Tec Ultra
  • Additional, multi-step treatment minimizes smoke and off-gassing

ALUFIX-G1&G2

  • Flame-resistant Polyurethane coating with aluminium pigmentation
  • Solvent- and halogen free
  • No thermal decomposition up to approx. 200 °C
  • Maximum application temperature approx. 500 °C
  • Short-term temperature up to approx. 600 °C
  • Improved slip and cut resistance
  • Additional flame resistant treatment
  • Diverse certifications and testing evaluations are available

PTFE

  • One-sided/two-sided coating based on PTFE
  • Excellent anti-adhesive properties
  • Low friction coefficient
  • Temperature resistance: -25 °C to +260 °C, higher short-term
  • Available in multiple colour variations
  • Variants: static (grey), antistatic (black)